Ease Release 700 is a general purpose release agent. Ease Release 700 is designed to release polystyrene, polyethylene, wax, synthetic rubber, acrylics, phenolic, melamine and metal castings from aluminum, chrome, epoxy, polyester, rubber, and steel molds. Ease Release 700 is also effective as a surface lubricant for assembling plastic and rubber components.

Features:

• Easy to apply
• Fast drying
• Effective over a broad temperature range from 70F to 500F

Ease Release 700 provides:

• Excellent release
• Excellent surface finish
• No build-up on mold surfaces
• Reduced mold maintenance and down time
• Greater productivity

Application:

• Thoroughly clean your mold with Mold Cleaner 2508 or any suitable cleaner to remove all traces of previous coating and oils.
• Apply Ease Release 700 using aerosol spray. Hold the can 6 to 8 inches from the mold surface to ensure a light, even coating. When the molds are new or have been blasted with an abrasive, season the mold by applying a heavy coating of release. Heat the mold to process temperature, then wipe the excess with a rag and reapply a light coating of Ease Release before a regular molding.
• Ease Release 700 is fast drying and requires no baking during the normal molding process.
• Reapply a light coating before each molding.

Finishing:

Thorough cleaning of molded parts with Isopropyl Alcohol may be required prior to staining, painting, or bonding.

SDS

TDS