Ready to wear, finished and painted mask. This mask is sculpted in a wax based clay, a mold is created and the mask is cast in urethane, sanded and hand painted. Each mask is sealed with clear coat to protect the paint. Every mask is slightly different due to the hand painting.

These masks are lined with foam and have elastic straps attached. You may need to add or subtract the foam to get it to fit you just right. You can also widen the mask with heat if it is too small:

If the mask does not fit use a heat gun on the inside or heat in the oven at around 175 degrees for a few minutes. Gently open the sides of the mask by pulling them. Set the shape you want by leaving on an upturned bowl or object to hold the shape while it cools. Let the mask completely cool before handling again.

– A detailed page on the care of these masks can be found here: http://missmonster.myshopify.com/pages/mask-care-info

– This is not a piece of safety equipment, this is a wearable prop. Please use common sense.

-Please treat this piece of artwork carefully. Wrap in cloth while traveling with it to prevent any damage to the paint surface. Do not leave in direct sunlight- if the mask does warp you can easily shape it back to your desired width with heat.

-This mask fits most faces but a perfect fit is not guaranteed.

– Do not use this as safety equipment or a welding mask or anything else but costuming. Please don’t make dumb choices with this. I am not responsible for injuries sustained through improper use of this mask.

By purchasing this you acknowledge that you have read and agree with the shop’s policy page and have read and agree to comply with all of the information on this page.